Guided Acquisition with Intraoral Sensors or PSP Devices
To acquire intraoral images with a template:
Perform an immediate scan or perform a scheduled scan.
If not already chosen in a scan request, select your preferred template.
Select the layout and images that you want to acquire.
By default, all images are selected. Selected images are highlighted in blue.
Click a selected image again to deselect it. Select the images by clicking the images or drawing a rectangle around the images to include.
To deselect all images, click Clear selection.
To change the order in which the images will be acquired, click Edit capture order 
and click the placeholders in the correct order.
Note
A template capturing order can be shared with another DTX Studio Clinic user via the share settings.
Click Start.
Go to the device to perform the scan.
Note
By default, images are automatically rotated. To disable this, go to the image settings.
On the preview page, inspect the acquired images.
Notes
To skip an image in the template flow, click Next. To acquire a skipped image, click Previous to return to the previous tooth range selection.
By default, images are shown with applied filters. To show unfiltered images instead, go to the image settings.
To remove the indicated teeth on the tooth range, click Clear selection.
To rotate or flip the acquired image, hover over the preview image and press one of the icons or shortcuts below:
| Action | Icon | Shortcut |
| Rotate image counterclockwise |  |
Alt +  or Shift+R |
| Rotate image clockwise |  |
Alt +  or R |
| Flip intraoral image or clinical picture horizontally |  |
U |
| Flip intraoral image or clinical picture vertically |  |
Shift+U |
When the intraoral image or clinical picture belongs to an image group (multi-shot intraoral camera pictures), rotation and flip are also applied to all the other images or pictures of that image group.
The tooth range information that is taken from the instructions is saved in the acquired image, so that the images are loaded on the correct placeholders in the intraoral workspace.
Click Finish to end the action or click Open patient to open DTX Studio Clinic.